Table of Contents
Advertisement
The Connectors
Using the Adaptor
1. connect the adaptor into the AC wall outlet and the cord into the DC power jack on the underside of
the piano body.
2. Ensure the piano
is turned off when
connecting and
disconnecting the
power.
4. If you have done the above procedures,
you are now safe to turn on the piano.
Caution:
When the piano is not in use or during a thunderstorm, disconnect the power for
safety sake.
Using Headphones jack
There are two phones jacks, speaker is shut
off when headphone is plugged into the
phones jack(2), speaker sound is always
on when headphone is plugged into the
phones jack(1)
. Speaker is shut off when
a pair of headphones connected to the two
jacks.
Caution:
Never use the headphone with high volume, as it may hurt your ear.
To prevent the damage of the speakers, ensure that the volume is set to the minimum level before
connecting the power and other devices.
Using the AUX.OUT jack
When you want to listen to the voice with
an amplifier, connect amplifiers to the AUX
OUT L/MONO and R jacks on the left panel.
The volume is adjusted with the VOLUME
button. (For monaural playback, use the
L/MONO jack. For stereo playback, connect
both L/MONO and R jacks.)
Adaptor DC 12V
4
Plug the power cable
into an AC power
outlet.
3. Turn the volume switch
anti-clockwise to reach
the minimum volume
level.
Advertisement
Table of Contents
