D Elay Start - Miele G 1 series Operating Instructions Manual

A d d itio nal fu nc tio ns
D elay star t
The start time of a programme can be
delay ed, e.g. to benefit from economy
rates of electricity . A delay start time of
between half an hour and 24 hours can
be selected.
W ith a delay start time of between 30
minutes and 9 hours 30 minutes, the
delay is set in 30 minute stages. F or 10
hours or more, it is set in one hour
stages.
W hen using the D elay start function,
make sure that the detergent
compartment is dry before adding
detergent. W ipe dry with a cloth if
necessary . If the compartment is
wet, powder detergent can become
lumpy and stick to the dispenser,
with the result that it is not fully
dispensed. D o not use liq uid
detergent when selecting D elay
start, as it can run into the
dishwasher before it is req uired.
40
^ O pen the door.
^ S witch the dishwasher on with the O n
button U .
The O n indicator light U comes on.
^ S elect the programme req uired with
the programme selector button.
^ P ress the , button.
The last D elay start time used will
appear in the D elay start display . The
O n indicator light , comes on.
^ S et the req uired time using the ,
button.
If the button , is kept pressed in, the
time will increase automatically up to
24 ^. To start again with 30 minutes,
press the , button twice.
^ C lose the door.