•
2. The test
does not
start after
applying
the blood
•
drop.
•
•
What It Means
Blood drop is too small
Problem with test strip
Sample applied after
meter turns off
Problem with meter
What To Do
Add blood to the same sample area within
60 seconds, or repeat the test using a new test
strip and a larger blood drop .
1 . Repeat the test using a new test strip . Wait
for 'apply blood to strip' message to appear
before applying blood (or 'apply control
solution to strip' message if you are applying
control solution) .
2 . If problem continues, contact Customer
Service .
Contact Customer Service .
34