Configuring Poe Settings - Ubiquiti EdgeSwitch ES-24-250W Quick Start Manual

Configuring PoE Settings

The PoE settings for ports 1-24 are set to PoE+ auto by default,
so 802.3af/at devices can be plugged in and automatically
receive PoE.
WARNING:
that the connected device supports PoE and the
supplied voltage.
1. Go to PoE > PoE Configuration.
2. Select the Ethernet port you want to configure. Then
click Edit.
3. Select the appropriate mode: Off, PoE+ auto, or
24V passive from the PoE Mode drop‑down menu.
Then click Submit.
For more information, refer to the EdgeSwitch documentation,
which is available at documentation.ubnt.com/edgemax
Before activating 24V passive PoE, ensure