Linn UNIDISK SC PLAYER Owner's Manual page 37

Table of user options
(continued)
Option Description
PASS REMOTE IN TO OUT If set to ENABLED, the unit passes RC5
(This option will not be commands received at REMOTE IN to REMOTE
available if KNEKT MODE OUT.
has been set to AUTO,
MAIN or LOCAL.)
AUTO SOURCE SELECTION If set to ENABLED, pressing any disc key
(This option will not be ( , etc) on the handset or front panel
available if KNEKT MODE will automatically put the unit into Disc
has been set to SOURCE.) mode.
SOURCE MEMORY If set to ENABLED, the unit selects the last
(This option will not be used pre-amplifier settings for each source.
available if KNEKT MODE If set to DISABLED, the same pre-amplifier
has been set to SOURCE.) settings are used for all sources.
2 CHANNEL AUDIO Use this option to set whether the unit
outputs a two-channel (select PURE
STEREO) or a surround encoded multi-
channel signal (select SURROUND
ENCODED) through the KNEKT, SCART* and
TV OUT sockets.
2 CHANNEL LFE Use this option to set whether the unit
includes (set to INCLUDED) or excludes
(set to EXCLUDED) the LFE (Low Frequency
Effects) signal in a two-channel downmix
that is being output through the KNEKT,
SCART* and TV OUT sockets.
RS232 BAUD RATE Sets the baud rate for RS232 control.
RS232 EVENTS If set to ENABLED, the unit passes
information regarding the internal status of
the unit to an external device that accepts
RS232 data.
RS232 STARTUP MESSAGE If set to ENABLED, the unit will output an
RS232 start message when the unit is
switched on.
CD COMMANDS If an external CD player is connected to the
UNIDISK SC and you want the UNIDISK SC
to ignore CD handset commands, set to
IGNORED.
*SCART for SCART version only.
x
Settings Option
PLAY COMMAND
ENABLED
DISABLED
STOP COMMAND
(DISC) ENABLED
(DISC) DISABLED
REPEAT COMMAND
ENABLED
DISABLED
PURE STEREO
SURROUND ENCODED
HI-RES SACD/DVD-A
AUDIO
INCLUDED
EXCLUDED
SCROLL SACD TEXT
9600
4800 to 230400
(9 settings)
ENABLED
DISABLED
ENABLED
DISABLED
ACCEPTED
IGNORED
31
User Options
Description
If you wish to use a handset other than the
one supplied with the unit, and the other
handset has separate play and pause keys,
set to PLAY ONLY.
If you wish to use a handset other than the
one supplied with the unit, and the other
handset has separate stop and eject keys,
set to STOP ONLY.
If you wish to use a handset other than the
one supplied with the unit, and the other
handset has only a repeat key, set to
REPEAT A-B / ALL. (If you select REPEAT
A-B / ALL a press and release of the repeat
key will act as a REPEAT A-B command and
a press and hold of the repeat key will act
as a REPEAT ALL command.
This option is for use if you have five full-
range speakers in your system plus a
subwoofer. When playing an SACD or DVD-
Audio and As Mix has been selected as the
audio mode, the DIRECT setting will bypass
the unit's bass redirect circuitry, resulting in
higher audio quality.
ONCE: Track information on SACDs will
scroll once across the front panel display.
LOOP: Track information on SACDs will
scroll repeatedly across the front panel
display.
OFF: Track information on SACDs will not
appear on the front panel display.
UNIDISK SC PLAYER
Owner's Manual
English
Settings
PLAY ONLY
PLAY / PAUSE
STOP ONLY
STOP / EJECT
REPEAT ALL
REPEAT A-B / ALL
DIRECT
NORMAL
ONCE
LOOP
OFF