Epson EHDMC10 User Manual page 3

Do not place vases, containers containing water, or medical containers on this product.
If any liquid spills from the container, a fire or electric shock could occur.
Take care when handling the power plug.
If it is not handled correctly, a fire or electric shock could occur.
Note the following points when handling the plug.
• Do not overload wall outlets, extension cables, or power strips.
• Do not plug it in if there are any foreign substances, such as dust, attached to the plug.
• Make sure the plug is fully plugged in.
• Do not plug in or unplug if your hands are wet.
• Do not unplug by pulling on the power cable.
• Do not use a different power supply (AC adapter).
Do not use a damaged power cable.
Otherwise, a fire or electric shock could occur.
• Do not modify the power cable.
• Do not place heavy objects on the power cable.
• Do not apply excess force, bend, or twist the power cable.
• Do not perform wiring near an electric heater.
Do not install or use this product in locations subject to humidity or water such as the
outdoors, or near a bath or shower.
Otherwise, a fire or electric shock could occur.
Do not touch the plug during a thunderstorm.
Otherwise, an electric shock could occur.
If you notice any of the following abnormalities, turn off the product immediately,
unplug the power cable from the electrical outlet, and contact your local dealer or
Epson service call center.
• If you see smoke coming from the product, or notice abnormal odors or sounds.
• If any water or foreign substance enters the product.
• If the product was dropped and the case was damaged.
If you continue using the product in any of these states, a fire or electric shock could occur.
Do not perform repairs yourself.
3