Connecting (MOVERIO BT-200 Operations)
1. Launch MOVERIO Mirror that comes preinstalled on MOVERIO BT-200.
2. Tap [Sink] on the MOVERIO Mirror
3. Tap [Target Device].
4. Tap the Adapter Name (EHDMC1-XXXXXX) attached to this unit from
the list of available devices.
The status displayed below Adapter Name changes to [Invited], and connection
You see the following screen on the device connected to the HDMI Output port
Connection is complete when the status displayed below Adapter Name changes
to [Connected] and the Link indicator on this unit changes from flashing to lit.
Images are displayed on MOVERIO BT-200.
You cannot output images to the MOVERIO BT-200 and the device connected
to the HDMI Output port at the same time. Press the Wireless/Pass-Thru but-
ton to switch the output device without changing the cable connection.
Ending the Connection (MOVERIO BT-200 Operations)
1. Press the [
2. Tap [
], and then follow the on-screen instructions to stop receiving
3. Press the [
] key several times to close MOVERIO Mirror.
] key on MOVERIO BT-200 while images are being