Epson EHDMC10 User Manual page 8

Connections
Sending images from a video device to your MOVERIO BT-200 (Source
function)
Connect a commercially available HDMI cable to the HDMI Input port on
this unit and to the HDMI output port on the device that is sending images.
Set the slide switch to Source.
Image sending device
Preparing to Connect (Wireless Mirroring Adapter Operations)
Press the Wireless/Pass-Thru button.
The Wireless Ready indicator flashes for approximately one minute. When the
indicator is lit, this unit enters connection standby status. If you connect a device
to the HDMI Output port, you see the following screen.
8
Image receiving device
Wireless/ Wireless Wireless
Link
Pass-Thru Connect Ready