Epson EHDMC10 User Manual page 10

Receiving images from MOVERIO BT-200 to output to a television (Sink
function)
Connect a commercially available HDMI cable to the HDMI Output port on
this unit and to the HDMI input port on the device that is receiving images.
Image receiving device
Preparing to Connect (Wireless Mirroring Adapter Operations)
Press the Wireless/Pass-Thru button.
The Wireless Ready indicator flashes for approximately one minute. When the
indicator is lit, this unit enters connection standby status. If you connect a device
to the HDMI Output port, you see the following screen.
10
Image sending device
Wireless/ Wireless Wireless
Pass-Thru Connect Ready Link