Epson EHDMC10 User Manual page 11

Connecting (MOVERIO BT-200 Operations)
1. Launch MOVERIO Mirror that comes preinstalled on MOVERIO BT-200.
2. Tap [Source] on the MOVERIO Mir-
ror main screen.
3. Tap [Target Device].
4. Tap the Adapter Name (EHDMC1-XXXXXX) attached to this unit from
the list of available devices.
The status displayed below Adapter Name changes to [Invited], and connection
starts. You see the following screen on the device connected to the HDMI Output
port while connecting.
Connection is complete when the status displayed below Adapter Name changes
to [Connected] and the Link indicator on this unit changes from flashing to lit.
Images are displayed on the device connected to the HDMI output port.
Note
When playing movie content, launch Gallery to select the content you want
to play. When you select the content, the application selection screen is
displayed. If movies are not played back smoothly when [Video Player] is se-
lected, select [MOVERIO Mirror].
Ending the Connection (MOVERIO BT-200 Operations)
1. Press the [
screen.
2. Follow the on-screen instructions to close MOVERIO Mirror.
] key on MOVERIO BT-200 on the MOVERIO Mirror main
11