Table of Contents
Advertisement
3
BIOS Setup
North Bridge
Memory Information
Total Memory
Memory Slot0
Memory Slot1
VT-d
Initiate Graphic Adapter
IGD Memory
IGD Multi-Monitor
PCI Express Port
VT-d
The options are Enabled and Disabled.
Initiate Graphic Adapter
Selects the graphics controller to use as the primary boot device.
When this fi eld is set to "IGD Function", you can use the display output from
both the integrated graphics and PCIe x16 graphics card to support total of 4
multiple displays (Extended Mode).
IGD Memory
Selects the internal graphics device's shared memory size.
IGD Multi-Monitor
Selects Enabled to support multiple monitors.
PCI Express Port
This fi eld is used to enable or disable the PCI Express Port function.
70
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Chipset
2048 MB (DDR3 1333)
2048 MB (DDR3 1333)
[Disabled]
[PEG/IGD]
[64M]
[Disabled]
[Auto]
Version 2.11.1210. Copyright (C) 2011 American Megatrends, Inc.
VT-d Enable/Disable
0 MB (DDR3 1333)
Enter: Select
+/ -:
F1:
F2:
F3:
F4:
ESC: Exit
Select Screen
Select Item
Change Opt.
General Help
Previous Values
Optimized Defaults
Save & Exit
Advertisement
Table of Contents
