Table of Contents
Advertisement
COM (Serial) Ports
COM 2
COM 1
COM 1 and COM 2:
RS232/422/485
COM 1 to COM 2 are fi xed at RS232.
The pin function of COM 1 and COM 2 ports will vary according to JP5/JP6's set-
ting. Refer to "COM1/COM2 RS232/RS422/RS485 Select" in this chapter for more
information.
The serial ports are asynchronous communication ports with 16C550A-compatible
UARTs that can be used with modems, serial printers, remote display terminals,
and other serial devices.
Connecting External Serial Ports
Your COM port may come mounted on a card-edge bracket. Install the card-edge
bracket to an available slot at the rear of the system chassis then insert the se-
rial port cable to the COM connector. Make sure the colored stripe on the ribbon
cable is aligned with pin 1 of the COM connector.
BIOS Setting
Confi gure the serial ports in the Advanced menu ("Super IO Confi guration" sub-
menu) of the BIOS. Refer to chapter 3 for more information.
Hardware Installation
2
1
19
2
31
Advertisement
Table of Contents
