Snmp > Communities - Linksys SLM248G4S (G5) User Manual

Chapter 
Authentcaton Method
Use this to enable or disable
Authentication between the SNMP Agent on the Switch
and the SNMP Manager.
None Disables authentication between the SNMP
•
Agent on the Switch and the SNMP Manager.
MD Password
Enables authentication using HMAC-
•
MD5-96 password authentication.
SHA Password
Enables authentication using HMAC-
•
SHA-96 password authentication.
MD Key Enables authentication using the HMAC-
•
MD5 algorithm.
SHA Key
Enables authentication using HMAC-SHA-96
•
authentication.
Password
Defines the local user password. Local user
passwords can contain up to 159 characters.
Authentcaton Key Defines the HMAC-MD5-96 or
HMAC-SHA-96 authentication level. The authentication
and privacy keys are entered to define the authentication
key. If only authentication is required, 16 bytes are defined.
If both privacy and authentication are required, 32 bytes
are defined. Each byte in hexadecimal character strings is
two hexadecimal digits. Each byte can be separated by a
period or a colon.
Prvacy Key
Defines the Privacy Key (LSB). If only
authentication is required, 20 bytes are defined. If both
privacy and authentication are required, 36 bytes are
defined. Each byte in hexadecimal character strings is
two hexadecimal digits. Each byte can be separated by a
period or colon.
Click Add to Lst to add the Group Membership
configuration to the respective table at the bottom of the
screen.
SNMP > Communities
The Communities screen is used to define SNMP
communities. The Communities screen contains the
following three areas: Communities, Basic Table and
Advanced Table.
24/48-Port 10/100 + 4-Port Ggabt Reslent Clusterng Smart Swtch wth 2 Combo SFPs
Configuration Using the Web-based Utility
SNMP > Communities
SNMP Management Staton
station IP address for which the advanced SNMP community
is defined. There are two definition options: either select
the first radio button and enter the management station
IP address in the field (default), or select All to include all
management station IP addresses.
Communty Strng Defines the password used to
authenticate the management station to the device.
Basc
Enables SNMP Basic mode for a selected community
and contains the following fields:
Access Mode
Defines the access rights of the community.
The possible field values are:
Read Only Management access is restricted to read-
•
only, and changes cannot be made to the community.
Read Wrte
Management access is read-write and
•
changes can be made to the device configuration, but
not to the community.
SNMP Admn User can access all device configuration
•
options, and can modify the community.
Vew Name
Contains a list of user-defined SNMP views.
Advanced
Enables SNMP Advanced mode for a selected
community and contains the following fields:
Group Name Defines advanced SNMP communities
group names.
Click Add to Lst to add the Communities configuration to
the respective Table at the bottom of the screen.
Defines the management
40