Linksys SLM248G4S (G5) User Manual page 16

Chapter 4
System Information
From the System Information screen you can check current
firmware versions and other general switch information.
System Information
Versions
The Versions screen displays version-related information
for each switch in the system.
Versions
Unt
The unit number of the switch, from 1 to 6.
Status
The status of the switch, either master or slave.
Software Verson
The version number of the software .
Boot Verson
The version number of the boot file.
Hardware Verson
The Switch's current hardware setup.
General System Information
The General System Information screen displays the System
Description, System Up Time, System MAC Address, System
Contact, System Name and System Location.
General System Information
24/48-Port 10/100 + 4-Port Ggabt Reslent Clusterng Smart Swtch wth 2 Combo SFPs
Management Settings
The Management Settings screen displays the Serial Port
Configuration option.
Management Settings
Serial Port Configuration
The Serial Port Configuration screen displays the current
baud rate setting. To change the baud rate, select Edt,
then use the spacebar to toggle through the different
baud rates. Use the Save action to set the new baud rate.
Serial Port Configuration
User & Password Settings
The User & Password Settings screen displays all the user
accounts defined on the system.
User & Password Settings
The default account is admn. You cannot edit this account
(its user name and password cannot be changed). For
security purposes, Linksys recommends creating at least
one user account with a unique user name and password.
You can create up to five user accounts total.
Installation
10