Net Optics 10/100BaseT Slim Tap Installation Manual page 13

You now have seven options, listed in the chart below:
(The following commands are not case sensitive)
Press this:
A on the keyboard
B on the keyboard
C on the keyboard
D on the keyboard
E on the keyboard
F on the keyboard
G on the keyboard
H on the keyboard
I on the keyboard
RESET Button
4 . Enter a to display Port A utilization (see below) .
5 . Enter b to see Port B utilization (see below) .
6 . Enter c to display link speed for Ports A and B (see below) .
To accomplish this:
Display Port A Utilization
Display Port B Utilization
Display Link Speed of Ports A and B
Display the Network ports alarm status
Configure Port A alarm threshold
Configure Port B alarm threshold
Display the highest recorded utilization
RESET Network Port A Alarm
RESET Network Port B Alarm
RESET Network Port A and B Alarms

10/100 BaseT Slim Tap