Connect Slim Tap Power; Connect The Slim Tap To A Computer And Access The Cli - Net Optics 10/100BaseT Slim Tap Installation Manual

Connect the Slim Tap Power
1 . Supply power to the Tap using the two redundant power supplies included
with the unit .
2 . Verify that the appropriate Power LED(s) are illuminated .
3 . Turn off power to the unit .
Figure 6: Connecting dual power supplies
The second power supply is available to support the flow of traffic to the
monitoring device in the event that the first power supply becomes
unavailable .

Connect the Slim Tap to a Computer and access the CLI

Be sure that power is disconnected before you begin . To access the CLI:
1 . Connect a PC with terminal emulation software to the Tap using the sup-
plied RS232 DB-9 Cable (Figure 7)
10/100 BaseT Slim Tap