Multihandset Features; Headset Feature; Conference Calling - Uniden XDECT 6145BT Series Owner's Manual

Call Blocking entry options
With the phone in standby, open the call block list and find the entry you want.
Press MENU to open the individual entry menu. Choose one of these options:
Choose this...
Edit
Delete

Multihandset Features

To use the features in this section, you need at least 1 cordless handset.
Your base supports a total of 10 accessory handsets.
You must register accessory handsets to the base before using them.
Handsets that aren't registered display a Not Registered message. For registration
instructions, see page 39.
If a handset was ever registered to a base, you must reset it before it can register
to a new base; see page 39.
Conference Calling (1 line)
When an outside call comes in on the land line or the via a mobile, the headset and
the base can join in a conference call with the outside caller.
•
To join a call that's already in progress, just press ON/OFF/TALK on the headset or
pick up the corded handset on the base.
•
To leave the conference call, hang up normally; the other handset/headset
remains connected to the call.
Conference Calling (2 line)
A landline call and a mobile call can be connected in conference using the Line
Conference feature.
•
When an outside call comes in on the land line and then another outside call
via a mobile, the headset and the base can join in a conference call with the
outside callers (4-way conference).
•
To conference a the second outside call, press MOBILE or HOME to connect to the
second line. The first line automatically goes on hold, then press MENU and
select Line Conference on the base.
•
To join a call that's already in progress, press ON/OFF/TALK on the headset.
•
To leave the conference call, hang up normally; the other handset/headset
remains connected to the call.
To...
Edit this entry. The phone will prompt you to edit the
name & phone number.
Erase this entry from the list & allow calls from this
number.
27