Pair Bluetooth Phone; Setting Up Mobilelink Bluetooth Connection - Uniden XDECT 6145BT Series Owner's Manual

settIng Up MoBIlelInK BlUetootH ConneCtIon

The XDECT 6145BT with MobileLink technology can connect with mobile phones
that support the Bluetooth V2.1 handsfree profile.
Visit our website on the front cover or contact customer service for a detailed list of
tested mobile phones.
•
If you are not certain of the profiles supported by your Bluetooth phone or if you
have difficulty pairing your phone to the XDECT 6145BT, see the manual that
came with your phone.
•
With the MobileLink feature, you can essentially treat your mobile phone as
a second line. You can use the XDECT 6145BT handset to make and receive
calls on your mobile phone number, put mobile phone calls on hold, and
transfer calls to other handsets. See page 20 for more information.
•
Bluetooth wireless devices have a maximum range of about 3 m; the actual
range will vary depending on local conditions (obstacles, battery power,
interference, etc.).
pair your Bluetooth phone
Pairing "introduces" the Bluetooth device and the XDECT 6145BT and gives them
permission to connect to each other. In most cases, once you pair a phone to the
XDECT 6145BT, these devices connect automatically whenever they detect each
other. (If you have to manually reconnect each time, check the Bluetooth settings
on your mobile phone.) You can pair your Bluetooth devices through the XDECT
6145BT.
1. Press MENU to display the main menu.
2. Select the Bluetooth Setup menu, then select the Add Mobile phone submenu.
The base goes into pairing mode when the handset displays Search & select
from Mobile XDECT6145BT PIN: 0000.
3. On your Bluetooth phone, start a search for other Bluetooth devices. (This
process may take several seconds and it will be different for each mobile
phone. See your phone owner's manual for detailed instructions.)
4. Your phone should discover a device called XDECT 6145BT or Handsfree
device. When your phone asks if you want to pair with this device, answer yes.
5. If your phone prompts you for a PIN code or password to pair with the XDECT
6145BT, enter 0000 (four zeroes).
6. When your phone accepts the Bluetooth connection, the XDECT 6145BT
sounds a confirmation tone. The Bluetooth device number icon on the base and
the handset display light up.
#
Most mobile phones automatically transfer the audio to a Bluetooth device as soon
as it pairs; if yours does not, look in your mobile phone's Bluetooth setup for a
"transfer audio" or "send audio to device" option.
9