Specifications - iSP Technologies LT2 series Owner's Manual

SPECIFICATIONS

System
Frequency Range
Frequency Response (-3dB)
Horizontal Coverage Angle
Vertical Coverage Angle
Peak Output @ 1m
Crossover Points
Input Type
Input Impedance
Thermal Protection
Transducers
Low-Frequency Transducer
Diameter
Voice Coil Diameter
Power Handling
Mid-Frequency Transducer
Diameter
Voice Coil Diameter
Power Handling
High-Frequency Transducer
Diaphragm Diameter
Voice Coil Diameter
Throat Size
Power Handling
Diaphragm Material
Power Amplifiers
Low-Frequency Amplifier
Power Output
THD
Mid-Frequency Amplifier
Power Output
THD
High-Frequency Amplifier
THD
Line Input Power
Voltage
Current
Power
Physical
Height
Width
Depth
Weight
Enclosure
Mounting Methods
45Hz - 20KHz
50Hz - 19KHz
100 degrees.
65 degrees.
129 dB
350 Hz, 2.6KHz
Balanced differential
10K ohms
Output Drivers have internal protection, self-resetting. Heatsink
temperature monitored and input is muted if safe temperature is
exceeded, self-resetting. Transformer has internal thermal fuse, self-
resetting.
15" (381mm)
3" (76.2mm)
400 watts rms
10" (254mm)
2.5" (63.5mm)
300 watts rms
2" (51mm)
2" (51mm)
1" (25.4mm)
80 watts rms
Titanium
500 watts rms
<0.05% typical
400 watts rms
<0.05% typical
100 watts rms
<0.02% typical
117Vac, 60 Hz
6.9 amps
800 watts
19.75"
30.54"
19.5"
120 lbs.
18mm thick, 13 ply Baltic Birch plywood
3/8 eyebolt suspension