Attachment To Structures; Inspection And Maintenance - iSP Technologies LT2 series Owner's Manual

response, output current and a noticeable improvement in PUNCH. The D-CAT amplifier
technology utilizes a monolithic power amplifier driver that reduces parts count and greatly
improves reliability. The D-CAT amplifiers provide improved reliability by including short circuit
and over temperature protection.
The LT2 offers both ¼ inch RTS and XLR balanced inputs as well as, ¼ inch RTS and XLR
outputs for connecting multiple speakers. A sensitivity adjustment knob allows you to adapt
the speaker for a wide range of common signal levels. The Tripower cabinet is made of high
quality 13 ply Baltic birch plywood with a durable spray on black finish for long life.
SUSPENDING LOUDSPEAKERS
Important Notice!!!
The information in this section has been gathered from engineering data and is for
informational purposes only. None of the information in this section should be used without first
obtaining competent advice with respect to applicability to a given circumstance. None of the
information presented herein is intended as a representation of warranty on the part of ISP
Technologies. Anyone making use of this information assumes all liability arising from such
use.
All information presented in this manual is based upon materials and practices that are most
common to The United States of America and may not directly apply to other countries
because of differing material dimensions, specs, and/or local regulations. Users in outside
countries should consult with appropriate engineering and regulatory authorities for specific
guidelines.
Correct use of all flyware is required for secure system suspension. Careful calculations should
always be performed to ensure that all components are used within their working load limits
before the cabinet suspended. Never exceed the maximum load ratings.
Before hanging any speaker system, always inspect all components for cracks, deformations,
corrosion, missing, loose or damaged parts that could reduce strength and safety of the
cabinet. Do not suspend the cabinet until the proper corrective action has been taken.

ATTACHMENT TO STRUCTURES

A licensed professional engineer must approve the placement and method of attachment to
the structure prior to the installation of any overhead object. The following performance
standards should be provided to the professional engineer for design purposes; Uniform
building code as applicable, Municipal Building code as applicable and Seismic Code as
applicable.

INSPECTION and MAINTENANCE

Suspension systems are comprised of mechanical devices and, as such, they require regular
inspection and routine maintenance to insure proper function ability. Any suspended ISP
Technologies loudspeaker must be inspected for fatigue at least annually. The inspection shall
include a visual survey of all corners and load bearing surfaces for signs of cracking, water