Table of Contents
Advertisement
damage, de-lamination, or any other condition that may decrease the strength of the
loudspeaker enclosure.
Flyware that is provided with or for any ISP Technologies loudspeakers must be inspected for
fatigue at least annually. The inspection shall include a visual survey of the material for signs
of corrosion, bending, or any other condition that may decrease the strength of the fastener.
ISP Technologies is not responsible for the application of its products for any purpose or the
misuse of this information for any purpose. ISP is also not responsible for the abuse of its
products caused by avoiding compliance with inspection and maintenance procedures.
REAR PANEL DESCRIPTION
1. POWER SWITCH-This switch provides power to the Tri-Power power amp section. This
switch is a three-position switch where center is OFF and the outer positions are ON.
2. POWER INLET MODULE-This module provides a connection for the power cord and also
houses the mains fuse. (See Fuse Replacement Section)
3. INPUT GAIN- This control determines the overall input level of the signal to the power amp
section of the Tri-Power cabinet. Adjusting this level will not affect the level of the signal
passing through to output connectors.
4. BALANCED ¼" PHONE INPUT-This jack provides an input for balanced or unbalanced
line level signal source.
Advertisement
Table of Contents
Need help?
Do you have a question about the LT2 series and is the answer not in the manual?