bem wireless Sunrise User Manual page 6

Table of Contents

Advertisement

Set the Alarm (cont.)
Step 2: Set alarm time and mode
You can set alarm time and ring tone mode of the activated alarm
as following operations, if alarm 1 and 2 are activated at the same
time, alarm has the priority.
Press "alarm set" to enter the alarm setting
Press "alarm set" again, hours will blink on the LCD screen,
use up / down to adjust hour.
Press "alarm set" for the 3rd time, minute will blink on the
LCD screen, use up / down to adjust minute.
Press "alarm set" for the 4th time, the sun icon on the LCD
will blink, use up / down to set the light mode while alarm
rings. The icon flash slowly, the light will become brighter
slowly when the alarm rings, stay on with max brightness
after the alarm; the icon become solid, the light will go to
max brightness when alarm rings and stay on; the icon is off,
the light will not on when alarm rings.
Press "alarm set" for the 5th time, use up / down to set
the ring tone of alarm among 6 nature songs, FM, Buzzer
and off.
It will back to clock mode automatically 3 seconds after you
finish the setting.
Each alarm will last 2 minutes.
10
HL2501_Sunrise_UserGuide_Working.indd 10-11
Using the Snooze Function
Snooze function only works after alarm starts
Press "Snooze / Play / Pause /Answer" button on the speaker or
"snooze" on the remote to postpone alarm for 9 minutes when
alarm starts.
Using the Sleep function
Sleep function only works when the speaker is on.
Press "sleep" to activate auto off function, current auto off
time will display on LCD;
Repeat press "sleep" to change the auto off time: 15min >
30min > 45min > 60min > OFF;
t will back to clock mode automatically 3 seconds after you
finish the setting.
The LED light will slowly getting dark to off 2 minutes before the
speaker turns off.
Using the FM Radio
Press "audio mode" switch to FM mode, the FM icon will display
on the screen.
Press up or down, it will play current frequency on screen for 10
seconds, during this time, use SKIP+/SKIP- to adjust the frequency.
11
2/6/14 11:42 PM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents