bem wireless Sunrise User Manual page 5

Operation Details (cont.)
Play modes
Touch the "audio mode" on either side of the speaker or press
"audio mode" button on the remote to shift among following
play modes:
• Bluetooth mode: play an audio signal from the connected
Bluetooth© device.
• AUX mode: play an audio signal from the connected
"wired" device.
Please note, if an Aux cable is connected to the speaker it will
not play music from Bluetooth© connected devices.
• FM mode: play FM radio.
• Nature Song Mode: play 6 built-in songs.
• Press "audio mode" switch to natural sound play mode;
• Use SKIP+/SKIP- to select the sound you want to play, and
the selected icon will flash on the screen;
• The selected music will start playing immediately.
Bluetooth is the default play mode when the speaker is powered
on for the first time. And the speaker can remember the last play
mode and enter this mode automatically when it turns back on.
8
HL2501_Sunrise_UserGuide_Working.indd 8-9
Set the Clock
• Hold "time set" button on the remote to shift between 12
hours and 24 hours,the AM/PM icon will light up under 12
hours mode.
• Press "time set" button to enter time setting.
• Press "time set" again, hours will blink on the LCD screen, use
up / down to adjust hour.
• Press "time set" for the 3rd time, minute will blink on the LCD
screen, use up / down to adjust minute.
• It will go back to clock mode automatically 3 seconds after
you finish the setting.
Set the Alarm
Sunrise features duo alarm and you can set them easily by using
the remote control.
Step 1: Choose your alarm
• Press Alarm1/2 one the remote one time and LCD screen will
display alarm 1 icon, which means alarm 1 is activated.
• Press again and LCD screen will display alarm 2 icon and
remove alarm 1.
• Press again and LCD screen will display both alarm 1 and
alarm 2 icon to activate both alarms.
• Press the 4th time to remove both alarms.
9
2/6/14 11:42 PM