Tx Test - LG GD310 Service Manual

12. Stand-alone Test

12.2. Tx Test

①Click "Non signaling mode" bar and then confirm "OK" text in the command line.
①
②Put the number of TX Channel in the ARFCN.
③Select "Tx" in the RF mode menu and "PCL" in the PA Level menu.
④Finally, Click "Write All" bar and try the efficiency test of Phone.
③
②
LGE Internal Use Only
④
- 144 - Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes