Iclebo YCR-M05 Quick Start Manual page 2

www.iclebo.com
INSTALLATION OF ROBOT CLEANER
1. Preparation of the vacuum cleaning robot
1. After flipping over the vacuum cleaning robot, verify
the positions of the side brush.
2. Match the side brush in the same direction of the groove,
and push in hard.
2. Installation of the charging station and charging
USAGE OF ROBOT CLEANER
● Basic cleaning
1. Press Start/Stop(or Power) button. ( )
(Turn on with alarm sound)
2. Press Start/Stop button again. ( )
(the robot is preset for 90 minutes in normal and starts work
in random.
● Wet mopping
1. Turn over the robot as shown in the picture.
2. Attach mop on the mop plate after microfiber wet mop
soaked in water and then wrung out.
90 Max
AUTO
15 30 90 Max
ORDER 1 2
Body
Start/Stop button Start/Stop button
Remote
control
Start/Stop button Start/Stop button
3. Turn over the clearning robot body to its normal position and
press the start button ( ) twice please.
Please deselect climb mode if you wish to use the robot in mopping mode
(after installed mop plate on the bottom)
※ If not, the robot could be hanged Select Climb Mode Deselect Climb Mode
over on the doorsills or other
obstacles, and could not be
working properly.
AUTO AUTO
AUTO
15 30 90 Max
15 30 90 Max 15
● Spot Mode
Spot (Spiral) cleaning mode, it moves
in spiral around within 1.5m radius.
1. Press Start/Stop button. ( )
2. Press spot mode button. ( )
※ During spot mode operation,
the time indicator light will
1. Press Start/Stop button. ( )
blink in order
● Max mode
In Max mode, robot works until the battery is exhausted.
1. Press Start / Stop button. ( )
2. Press the time setting button( ) until a light on the letter
Max displays ( ) on the window
3. Press Start / Stop button. ( )
Product Care & Maintenance
1.Regularly empty the dust bin and replace the antibacterial filter
ORDER
1
Install the
Body
wet mop
Start/Stop
on the body
Install the
Remote
wet mop
control
Start/Stop
on the body
30 90 Max
1
ORDER
※ set up spot mode is only possible
Body
via remote control
Remote
control
Start/Stop
button
ORDER 1
Body
Start/Stop
Set Max mode
button via time button
Remote
control
Start/Stop Set Max mode
via time button
button
2 3
Start/Stop
button button
Start/Stop
button button
2 3
Start/Stop
button
2 3
Start/Stop
button
Start/Stop
button