Iclebo Arte YCR-M05 Quick Manual

www.iclebo.com
Product Care & Maintenance
1.Regularly empty the dust bin and replace the antibacterial filter
2. Cleaning Main brush
Furrow
3. Check display & Solution
Check
Cause
display
C 1 Lifted wheel Move the robot cleaner to flat area.
Move the robot cleaner to flat area in case the wheel is stuck on
Cannot detect floor
C 2
the threshold or porch.
Dust bin error Dust bin is not properly assembled. : Install properly.
C 3
Check if foreign substance such as hair or lint exists on the wheel.
C 4 Wheel motor overload
: Remove the foreign substance.
Check if foreign substance such as hair or lint exists on the main
Brush motor overload
C 5
brush or side-brush. : Remove the foreign substance.
Suction motor overload Clean filter, empty the dust bin.
C 6
Turn off the power switch of the robot cleaner then turn it on again.
Internal system error
C 7
Check the front wheel & magnetic sensor are clean & correctly
Magnetic Encoder
C 8
inserted.
Solution
iAQG.USA.V0
YCR-M05
Quick Guide
Vacuum Cleaning Robot iClebo Arte
※The complete user manual is also available to download on our website
www.iclebo.com