Dell OptiPlex 3020M Owner's Manual page 43

Option
Intel SpeedStep
C States Control
Limit CPUID Value
Intel TurboBoost
Hyper-Thread Control
Table 7. Power Management
Option
AC Recovery
Auto On Time
Description
• 2
Allows you to enable or disable the Intel SpeedStep mode of the
processor.
• Enable Intel SpeedStep
- This option is enabled by default.
Allows you to enable or disable the additional processor sleep states.
• C States
- This option is enabled by default.
This field limits the maximum value the processor Standard CPUID
Function will support.
• Enable CPUID Limit - This option is not set by default.
NOTE: Some Operating system will not complete installation when
the maximum CPUID Function is greater than 3.
Allows you to enable or disable Intel TurboBoost mode of the processor.
• Disabled - Does not allow the TurboBoost driver to increase the
performance state of the processor above the standard performance.
• Enabled - Allows the Intel TurboBoost driver to increase the
performance of the CPU or graphics processor.
Allows you to enable or disable the HyperThreading in the processor.
Default Setting: Enabled.
Description
Specifies how the computer will respond when AC power is applied after
an AC power loss. You can set the AC Recovery to:
• Power Off - This option is enabled by default.
• Power On
• Last Power State
This option sets the time of the day when you would like the system to
turn on automatically. Time is kept in standard 12-hour format
(hour:minutes:seconds). The startup time can be changed by typing the
values in the time and A.M./P.M. fields.
• Disabled - The system will not automatically power up. This option is
selected by default.
• Every Day - The system will power up every day at the time you
specified above .
• Weekdays - The system will power up Monday through Friday at the
time you specified above.
• Select Days - The system will power up on days selected above at the
time you specified above.
43