Linear Acoustic LA-5180 Metadata Frame Sync/Generator Operation Manual
Chapter 2: Connections
This chapter covers all required connections for the LA-5180.
2.1
Unpacking and Inspection
Before unpacking the unit, inspect the outer carton for shipping damage. If the car-
ton shows damage, inspect the unit in those areas. Please save the carefully designed
shipping carton and packing materials. In the unlikely event that the unit needs to be
returned to the factory, alternate cartons or packing materials may not be adequate
and can cause damage not covered by warranty.
The following essential items are provided with the unit:
•
Two power cords (style to match shipping location)
•
Small bag with replacement fuses, a DB-9 Male connector and shielded plastic
backshell, and a handy permanent marker.
•
For AMAS option: DB9-M "Y" cable and AMAS software installation CD-ROM
•
This manual
•
Warranty information: Please fill out and return the warranty card to Linear
Acoustic to ensure your software and documentation are kept up to date.
2.2
Installation
Linear Acoustic LA-5180 installation requires:
•
One standard rack space units with ADEQUATE VENTILATION (the unit
uses convection cooling via vents on the left and right sides of the unit);
•
An analog black-burst video reference signal;
•
A metadata source: RS-485 serial or from the VANC space of HD-SDI
•
standard 75-Ohm BNC cables for signal connections;
WARNING: Reference analog Black Burst MUST be applied at all times for proper metadata timing.
9