Omron FQ2-S Series User Manual page 130

Setting the Output Format
[In/Out] − [I/O setting] − [Output data setting] − [Link data output/Fieldbus data output]
1
Press [Output format].
2
Press [Output form].
3
Set either a floating point decimal or a fixed decimal for the output form.
Item Description
Output form Set the output form for numerical data.
Fixed decimal point
Floating decimal point
Outputting Character Strings (Only Supported on the FQ2-S4/CH)
You can set whether to output the character string that results from reading. Outputting the character string is
possible for the following inspection results.
• OCR
• Bar code
• 2D-code
• 2D-code (DPM)
The procedure for outputting the character string is given here for two inspection items.
[In/Out] − [I/O setting] − [Output data set] − [Link data output/Fieldbus data output] − [Output
data set]
1
Select the inspection item for which to output the character string.
2
Set the following items on the setting display.
Parameter
String output ON/OFF
Partial output ON/OFF
Output string setup
NG String output on/off
128
Controlling Operation and Outputting Data with PLC Link Communications
Outputs the data as a x1000 value.
Example: 123.456 is output as 0x0001E240
Outputs the data in floating point decimal for-
mat.
Example: −123.4567 is output as 0xc2f6e979
Setting
OFF (default)
Yes
No (default)
Yes
1 to 128 for OCR
1 to 1024 for Bar code, 2D-
code, or 2D-code (DPM)
Yes (default)
No
Setting range
Floating point or fixed point (default: fixed point)
Description
Sets whether to output the character string that results
from reading.
Sets whether to specify the range of characters to output.
Sets the output range.
Sets whether to output an NG string.
FQ2-S/CH User's Manual
for Communications Settings