General Information; Atv Identification Numbers; Ignition Switch Key; Control Locations And Functions - Arctic Cat 650 2011 Operator's Manual

General Information

ATV Identification
Numbers
The Arctic Cat ATV has two identifica-
tion numbers: Vehicle Identification
Number (VIN) and Engine Serial Num-
ber (ESN).
The VIN is located on the frame support rail.
The ESN is located on the left-side rear
of the engine crankcase.
These numbers are required by the dealer
to complete warranty claims properly. No
warranty will be allowed by Arctic Cat if
the VIN or ESN is removed or mutilated
in any way.
Always provide the ATV name, Vehicle
Identification Number, and Engine Serial
Number when contacting an authorized
Arctic Cat ATV dealer for parts, service,
accessories, or warranty. If a complete
engine must be replaced, ask the dealer to
notify Arctic Cat for correct registration
information.

Ignition Switch Key

Two keys come with the ATV. Keep the
spare key in a safe place. An identifying
number is stamped on each key. Use this
number when ordering a replacement key.
46
Control Locations and
Functions
Ignition Switch
The ignition switch has three positions.
AF968B
OFF position — All electrical circuits
except the accessory plug are off. The
engine will not start. The key can be
removed in this position.

NOTE: The accessory plug is
CF109I
powered by the battery at all times.
ON position — The ignition circuit is
complete and the engine can run. The key
cannot be removed in this position.
LIGHTS position — The ignition circuit
is complete and the headlights and tail-
light are on. The key cannot be removed
in this position.
CAUTION
Leaving the ignition switch in the ON
or LIGHTS position for a long period
of time when the engine is not run-
ning may cause the battery to dis-
charge. Always leave the ignition
switch in the OFF position when
engine is not running.
ATV-0055
ATV-0056