Power Consumption For The Nytro Xp6300 Card; Thermal Considerations; Maximum Sensor Temperature - Seagate Nytro XP6302-8B2048 User Manual

www.seagate.com
If you experience a problem with your Nytro XP6300 card that you cannot resolve, report it to your FAE or, if you
obtained the product from an OEM, report it to the OEM. Keep these tips in mind when reporting a problem:
Clearly identify and report the revision level of the Nytro XP6300 card. To view this information, use the ddcli

command, Option 1.
Report the part number listed on the label, and clearly identify the board revision.

Describe the steps leading up to the error.

Report the operating system version and the host driver version.

3.1.3

Power Consumption for the Nytro XP6300 Card

The Nytro XP6300 card receives power from the PCIe 12-V power rail.
Use the following data for power consumption.
Table 3 Power Consumption
Idle
21.1 W
3.1.4

Thermal Considerations

The board is designed to operate in an environment defined by the following parameters:
Temperature range:

Relative humidity range:

Maximum wet bulb temperature:

Minimum airflow:

Relative humidity range:

Operating altitude:

De-rate:

The board is designed for the following storage and transit environmental parameters:
Temperature range:

Relative humidity range:

3.1.4.1

Maximum Sensor Temperature

System design and cooling capacity variations can affect the actual airflow delivered to the Nytro XP6300 cards.
System-level fan speeds might require adjustment to make sure that the Nytro XP6300 sensor temperature does not
exceed the maximums. The maximum sensor temperature for the Nytro XP6300 cards is 76 °C.
Seagate Nytro XP6300 Flash Accelerator Cards User Guide, Rev. A
Typical Power I/O
36.2 W
NOTE ypical power I/O was measured at 8-KB, random access, 30% write,
T
70% read, Queue Depth (QD)=32/SSD. Maximum power I/O was
measured at 4-KB, random access, 70% write, 30% read, QD=32/SSD.
Maximum Power I/O
37.2 W
5 °C to 45 °C
5% to 90% noncondensing
28 °C
300 LFM
20% to 80% non-condensing
3000 m
2 °C per 1000 m above 1000 m
–25 °C to 70 °C
5% to 95% non-condensing
Nytro XP6300 Card Characteristics
15