Routing - D-Link DSL-520B User Manual

Section 3 – Configuration

Routing

To access the Routing windows, click the Routing button in the Advanced Setup directory.
If the Enable Automatic Assigned Default Gateway checkbox is ticked,
the Router will accept the first default gateway assignment received from
one of the enabled PPPoA, PPPoE, or MER/DHCP enabled PVC(s).
Untick the Enable Automatic Assigned Default Gateway checkbox If
you want to configure the default gateway manually. Tick the Use Default
Gateway IP Address checkbox and type in the Default Gateway you
want to use. If you want to use an Interface as your default gateway tick
the Use Interface checkbox and choose an interface from the drop-down
menu.
When you have finished configuring the Default Gateway click the
Save/Apply button.
To access the Static Route window click the Static Route link in the
Routing directory. Click the Add button on the Static Route window to
access the following window:
D-Link DSL-520B User Manual
43