D-Link DSL-520B User Manual page 26

Section 3 – Configuration
QUICK SETUP – BRIDGING
To enable bridging, tick the Enable Bridge Service check box and enter a
Service Name.
To disable WAN service, unselect the check box.
Click the Next button to continue.
QUICK SETUP – BRIDGING
This window allows you to configure the Router IP address and subnet
mask for your LAN. Once you have entered an IP address and subnet
mask, click the Next button to continue.
QUICK SETUP – BRIDGING
This summary window allows you to confirm the bridging settings you
have just made. Click the Save/Reboot button to save your new bridging
settings and restart the Router.
D-Link DSL-520B User Manual
25