Indicators; Power Saving Function - Canon PowerShot SD600 User Manual

22
Indicators
The camera indicators light or flash under the following
circumstances.
eUpper Indicator
Green: Ready to shoot
Blinking Green: Image recordinglreading/erasing/transferring
(when connected to a computer)
Orange: Ready to shoot (flash on)
Blinking Orange: Ready to shoot (camera shake warning)
eLower Indicator
Yellow: Macro mode/infinity mode/AF lock mode
Blinking Yellow: Focusing difficulty (camera beeps once)
Power Saving Function
This camera is equipped with a power saving function. The power
will shut off in the following circumstances. Press the power button
again to restore power.
Shooting Mode Powers down approximately 3 minutes after the last
control is accessed on the camera. The LCD monitor
automatically turns off 1 minute* after the last control is
accessed even if [Auto Power Down] is set to [Off].
Press any button other than the power button or change
the camera orientation to turn the LCD monitor back on.
Playback Mode
Powers down approximately 5 minutes after the last
Connected to a Printer control is accessed on the camera.
* This time can be changed.
e
The power saving function will not activate during a slide
show or while the camera is connected to a computer.
e
The power saving function settings can be changed (p. 29).