List Of Messages - Canon PowerShot SD600 User Manual

List of Messages
The following messages may appear on the camera LCD monitor if
an error occurs during a camera and printer connection.
(Depending on the printer, some messages may not appear.)
• Please refer to the printer's user guide for the appropriate
remedies.
~~'W!l{t~4:
Printing restarts if you select [Continue] and press the SET
button. For the remedies to other messages that might
appear, refer to your printer's user guide.
50
No Paper
Paper Jam
Paper Error
No Ink
Ink Error
There is no paper set in the printer. If you are using
a printer equipped with a photo paper cassette,
specify the paper feed location using the Paper
Feed switch.
The paper jammed during printing. Select [Stop] to
cancel printing. Remove the jammed paper, reset
some other paper in the printer, then print again.
Either the paper is not set correctly in the printer, or
the size of the paper is wrong. Also open the paper
output tray if it is closed.
The ink tank has run out of ink or there is no ink
tank in the printer. The number of times that the
printer's error lamp blinks, and the error message
displayed, will indicate the appropriate remedy for
the error. Please refer to the printer's user guide for
the remedy.
The ink tank needs to be replaced soon. Prepare a
new ink tank. If you select [Continue] in the error
screen, you can restart printing.
You can restart printing if you select [Continue] in
the error screen. Please request replacement of the
waste tank (waste ink absorber) from your nearest
Canon Customer Support center listed in the
Contact List provided with the printer or in the user
guide.
There is a problem with the ink. If the printer's error
lamp is blinking and an error message is displayed,
please refer to the printer's user guide to ascertain
the problem and its remedy.