Light is reflected back
from the eyes when the
flash is used in dark
areas.
• Use the
m
(Auto Red-eye
Reduction) or
01
(Red-eye
Reduction On) mode (Basic Guide p.
9). For this mode to be effective, the
subject must be looking right at the
red-eye reduction lamp. Try asking
them to look directly at the lamp.
• Even better results can be obtained
by increasing the lighting in indoor
settings or approaching closer to the
subject. The shutter will not activate
for approximately 1 second after the
red-eye reduction lamp fires in order
to improve the effect.
Memory card slot/battery • First close the memory card slot/
cover was opened with
battery cover and then turn the
power on.
power on and then off again. (Basic
Guide
•
~
c:
cr
Ci'
fA
::::r
o
o
-
: i"
co
99