Canon PowerShot SD600 User Manual page 8

..
2. Press the shutter button fully
to shoot.
The shutter sound will
play
and the
image will record. The indicator will
blink green while the image is
recorded to the memory card.
~See Basic Shooting Functions (p. 6).
~See the Advanced Guide: Indicators (p. 22).
. . See the Advanced Guide for the various shooting methods
II
available.
Reviewing an Image Right After Shooting
After a shot is taken, the image appears in the LCD monitor for
approximately 2 seconds.
You can continue to display images regardless of the review duration
setting with the following procedures.
• Keeping the shutter button pressed after a shot.
• Pressing the FUNC./SET or DISP. button while the image is displayed in
the LCD monitor.
To stop displaying the image, press the shutter button halfway.
~ See the Advanced Guide: Review (p. 27).
[!ISee Basic Erasing (p. 11).
Basic Shooting Functions
• Selecting a Shooting Mode
1. Slide the mode switch to
&:I
(Rec.) or -" (Movie) (
CD).
2. Press the FUNC./SET button (
®)
and use the • or ..
button (
@)
to select a shooting mode.
For a scene mode (p. 7), select the
~
mode (default setting)
and press the MENU button to select the desired mode.
3. Press the FUNC./SET button (@).
~~~~~~~CD
6 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - -