Fan - HP 350 G2 Maintenance And Service Manual

Fan

Description
Fan (includes cable)
Before removing the fan, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the Battery (see
a. Service cover (see
b. Hard drive (see
c. Optical drive (see
d. Keyboard (see
e. Top cover (see
f. Speakers (see
g. System board (see
h. Heat sink (see
Remove the fan:
1. Remove the cowling material (1) that secures the fan to the heat sink.
2. Remove the fan (2).
Reverse this procedure to install the fan.
Battery on page 30), and then remove the following components:
Service cover on page
Hard drive on page 32)
Optical drive on page
Keyboard on page 39)
Top cover on page 42)
Speakers on page 50)
System board on page
Heat sink on page 58)
31)
37)
53)
Component replacement procedures
Spare part number
746657-001
61