The Protocol Tab - Netbeui; Figure 6-4: Protocol Tab - Netbeui - Linksys WPS54G User Manual

Wireless-G PrintServer

The Protocol Tab - NetBEUI

NetBEUI connection settings of the PrintServer are available on this tab.
Domain Name
Enter the name of the domain that you want the PrintServer associated with in the Domain Name field.
If you are unsure of the Domain Name, you can find it out by looking on any computer already on the network. In
Windows 98, right-click Network Neighborhood and select Properties. Under the Identification tab, there will be

Figure 6-4: Protocol Tab - NetBEUI

listed that computer's name, and the Domain to which it is connected. For Windows Me, 2000, or XP, right-click My
Network Places. In Windows Me, choose Properties from the menu that appears. In Windows 2000 or XP, choose
Properties from the menu that appears. Then, right-click Local Area Connection and choose Properties. The
Domain name will appear. If you want the PrintServer to be connected to that same Domain, enter that Domain
name here. If no Domain name exists there, you will use the Workgroup name from that window.
Options
Response Time. You can specify the Response Time that you prefer for the PrintServer. This is the amount of time
(measured in seconds) that the PrintServer will wait for a response from the network before "timing out."
Abort Print Job if Error. You also have the option to use this feature, Abort Print Job if Error. Selecting Yes here will
terminate the printing if there is an error of any kind. If you select No, print jobs that have errors will be sent to the
printer, but might not print properly.
Click the Save button to apply your changes, or click Cancel to cancel your changes.
Chapter 6: Configuring the PrintServer Using the Web-based Utility 22
The Protocol Tab - NetBEUI