The Netbeui Page; The Snmp Page - Linksys WPS11 User Manual

The NetBEUI Page

Click the NetBEUI
tab to view or
change the NetBEUI
connection settings
of the Wireless Print-
Server.
Enter the name of
the domain that you
want the Wireless
PrintServer associ-
ated with in the
Domain Name box.
If you are unsure of
the Domain Name, you can find it out by looking on any computer already
on the network. In Windows 95, 98 and NT, right-click Network
Neighborhood and select Properties. Under the Identification tab, there
will be listed that computer's name, and the Domain or Workgroup to which
it is connected. For Windows Millennium and 2000, right-click My Network
Places. Then right-click Local Area Connection and choose Properties.
Then right-click TCP/IP and choose Properties. The Domain name will
appear under Workgroup. For Windows XP, click Start and Control Panel.
Click Performance and Maintenance and then the System icon. Click the
Computer Name tab and then the Change button. The screen will show the
Workgroup name. If you want the Wireless PrintServer to be connected to
that same Domain, enter that Domain name here (not applicable to Windows
XP). If no Domain name exists there, you will use the Workgroup name
from that window.
Under Options, you can also specify the Response Time that you prefer for
the Wireless PrintServer. This is the amount of time (measured in seconds)
that the Wireless PrintServer will wait for a response from the network
before "timing out".
You also have the option to Abort Print Job if Error. Selecting Yes here will
terminate the printing if there is an error of any kind. If you select No, print
jobs that have errors will be sent to the printer, but may not print properly.
If you make any mistakes prior to saving, you can simply hit the Cancel but-
ton, which will let you exit the screen without making any changes. Once
you are certain of any changes you have made, click the Save button to
implement the changes.
Note: Linksys does not provide technical support for the NetBEUI
protocol.
31
Instant Wireless™ Series
Figure 7-4
Wireless PrintServer

The SNMP Page

Figure 7-5
Click the SNMP tab to view or change the SNMP settings of the Wireless
PrintServer.
The Wireless PrintServer supports SNMP (Simple Network Management
Protocol). This allows network supervisors to monitor and control the
Wireless PrintServer using network management platforms such as HP
OpenView, IBM SystemView, etc.
The appropriate MIB file must be imported into your SNMP management
program using the Import-Compile command. Check your management
program for details on this procedure. The MIB file is provided in the Mib
folder on the CD-ROM. The name of the file is Mib1p.mib.
Note: Linksys does not provide technical support for SNMP man-
agement.
32