The Netbeui Page; The Snmp Page - Linksys WPS11 User Manual

The NetBEUI Page

Click the NetBEUI tab to view or change the NetBEUI connection settings
of the Wireless PrintServer.
Enter the name of the domain that you want the Wireless PrintServer asso-
ciated with in the Domain Name box. If you are unsure of the Domain
Name, you can find it out by looking on any computer already on the net-
work. In Windows 95, 98 and NT, right click Network Neighborhood and
select Properties. Under the Identification tab, there will be listed that com-
puter's name, and the Domain to which it is connected. For Windows
Millennium and 2000, right click My Network Places. Then right click
Local Area Connection and choose Properties. Then right click TCP/IP
and choose Properties. The Domain name will appear. If you want the
Wireless PrintServer to be connected to that same Domain, enter that
Domain name here. If no Domain name exists there, you will use the
Workgroup name from that window.
Under Options, you can also specify the Response Time that you prefer for
the Wireless PrintServer. This is the amount of time (measured in seconds)
that the Wireless PrintServer will wait for a response from the network
before "timing out".
You also have the option to Abort Print Job if Error. Selecting Yes here
will terminate the printing if there is an error of any kind. If you select No,
print jobs that have errors will be sent to the printer, but may not print prop-
erly.
If you make any mistakes prior to saving, you can simply hit the Cancel but-
ton, which will exit the screen without making any changes. Once you are
certain of any changes you have made, click the Save button to implement
the changes.
29
Instant Wireless™ Series
Wireless PrintServer

The SNMP Page

Click the SNMP tab to view or change the SNMP settings of the Wireless
PrintServer.
The Wireless PrintServer supports SNMP (Simple Network Management
Protocol). This allows network supervisors to monitor and control the
Wireless PrintServer using network management platforms such as HP
OpenView, IBM SystemView, etc.
The appropriate MIB file must be imported into your SNMP management
program using the Import-Compile command. Check your management
program for details on this procedure. The MIB file is provided in the Mib
folder on the CD-ROM. The name of the file is Mib2p.mib.
General
SysContact Text Field - Name of the contact person.
SysLocation Text Field - Location of the contact person.
30