Panasonic WV-SW115 Installation Manual page 20

Camera tamperproof screw
IMPORTANT:
• Do not touch the lens.
• When tightening the screws, be careful to ensure that the cables does not tangle the cables.
• Before installing the camera, make sure that the mount bracket rubber A has been correctly
mounted. In addition, remove the dust or dirt, if any, from the mount bracket rubber A.
• Before installing the camera, be sure to remove the dust, if any, from under the mount bracket
when the cable access hole is open.
Using a gang junction box
• Secure the mount bracket to the gang junction box built in a wall.
<Install camera with a one-gang junction box through mounting screw hole C>
20
Mount bracket
Mount bracket
83.5 mm {3-9/32 inches}
Fixing screw hole
Wall
Cable access hole
One-gang junction box