Table of Contents
Advertisement
Major operating controls
Dome cover ring
SD memory card error indicator
(lit when data cannot be saved)
About the initial set button
After turning off the power of the camera, turn on the power of the camera while holding down this
button, and wait for around 5 seconds or more without releasing the button. Wait around 2 minutes
after releasing the button. The camera will start up and the settings including the network settings
will be initialized. Do not turn off the power of the camera during the process of initialization. Before
initializing the settings, it is recommended to write down the settings in advance.
Enclosure
SDHC/SD memory card slot
Dome cover
Initial set button
Lens
Access indicator
(lit when accessing)
Link indicator
(lit when linking)
Bracket rubber A
Network cable
Mount bracket
15
Advertisement
Table of Contents
