Network Menu - Sony F65 Operation Manual

4-2-6 Network Menu

This menu is not displayed in web browsers or on tablet
devices.
Page Configuration
item
<LAN Setting> DHCP
IP address
settings
IP Address
Subnet Mask
Default Gateway
Set
<Wi-Fi Setting> Wi-Fi
Wi-Fi settings
Wi-Fi Status
SSID
Network Type
IP Address
Subnet Mask
Default Gateway
Scan Network
Connect Manually
ad-hoc Setting
SSID
Network Type
Authentication
Encryption
WEP Key Index
Input Select
Key
Set
60
VF Menu List
Default Settings
Disabled Enabled, Disabled
192.168.1.1 0.0.0.0 to 255.255.255.255 If DHCP is enabled, displays the IP
255.255.255.0 0.0.0.0 to 255.255.255.255
0.0.0.0 0.0.0.0 to 255.255.255.255
-- Execute by Enter.
Disabled Enabled, Disabled
No connectivity Excellent, Good, Weak,
No connectivity
(Blank) (Blank), String of up to 32
characters
-- Infra, ad-hoc
-- 0.0.0.0 to 255.255.255.255 Displays the value obtained from the
-- 0.0.0.0 to 255.255.255.255
-- 0.0.0.0 to 255.255.255.255
-- Execute by Enter.
-- Execute by Enter.
-- Execute by Enter.
(Blank) (Blank), String of up to 32
characters
Infra Infra, ad-hoc
WPA2PSK Infra:
WPAPSK, WPA2PSK
ad-hoc:
OPEN, SHARED
AES Infra:
TKIP, AES
ad-hoc:
WEP
1 1, 2, 3, 4
ASCII8-63 ASCII8-63, HEX64,
ASCII5, ASCII13, HEX10,
HEX26
(Blank) 63-character ASCII or 64-
digit hexadecimal
-- Execute by Enter.
Remarks
Sets whether to automatically obtain an
IP address from a DHCP server.
address obtained from the DHCP server.
Enables/disables the Wi-Fi settings.
Enable for connection.
Displays the communication/connection
status.
Displays the network name.
Displays the network connection mode.
DHCP server.
Scans the network access point.
Used to enter the network access point.
Configures ad-hoc network mode.
Sets the network name. Displayed only
when Scan Network is executed.
Displays the connection mode.
Sets the network authentication method.
Displayed only when Scan Network is
executed.
Sets the data encryption method.
Displayed only when Scan Network is
executed.
Selects the WEP key index number
when using ad-hoc mode.
Selects the network encryption key
format.
ASCII8-63: 63 characters in 8-bit ASCII
format.
HEX64: 64 digits in hexadecimal format.
ASCII5: 5 characters in ASCII format.
ASCII13: 13 characters in ASCII format.
HEX10: 10 digits in hexadecimal format.
HEX26: 26 digits in hexadecimal format.
ASCII5, ASCII13, HEX10, and HEX26
are valid only in ad-hoc mode.
Sets the network encryption key.