Time - D-Link DWR-932 User Manual

Section 3 - Configuration
This page lets you set the time and date for the DWR-932 and also configure automatic time synchronization and daylight savings time.
t
ime
SNTP: Choose to Enable or Disable automatically synchronize the
time with a Simple Network Time Protocol (SNTP) server.
Primary SNTP Enter a SNTP server addresses which will be used to
Server: synchronize the router's system time and date.
Secondary SNTP Enter a SNTP server addresses which will be used to
Server: synchronize the router's system time and date.
Tertiary SNTP Enter a SNTP server addresses which will be used to
Server: synchronize the router's system time and date.
Time Zone: Enter the time zone where you are currently using the
DWR-932 to correctly set the time offset.
Synchronization You can specify in hours how frequently the DWR-932 will
Cycle: update the time from a SNTP server.
t /D S
ime Ate
Time/Date If you want to enter the current time manually, you can input
Settings: the correct values here.
Click Apply to save the current settings.
D-Link DWR-932 User Manual
ettiNgS

Time

55