Wi-Fi Sharing - D-Link DWR-932 User Manual

Section 3 - Configuration
Wi-Fi Sharing allows you to setup additional SSID's with the DWR-932 to allow multiple clients to connect to share an Internet connection or provide
access to the built-in microSD storage.
Enable Check this box to enable the Wi-Fi Sharing Feature.
Sharing:
Note: This feature is only available in SSID1 & SSID2 mode.
You will need to enable this on the Wi-Fi Mode Settings
page. Please see "Wi-Fi Mode Settings" on page 24 for more
information on how to set this feature up.
Network
If you wish to change your wireless network name (SSID), enter a
Name:
new name in the field provided. If you change the SSID, you may
need to re-connect to the router using the new SSID before you
can access your network or the configuration utility.
Broadcast
This option allows you to hide your wireless network. When this
Network Name
option is checked, your wireless network name is broadcasted
(SSID):
to anyone within the range of your signal. If you are not using
encryption then they could connect to your network.
Security Mode: You will need to choose one of the following options; Disable,
WPA-PSK(TKIP), WPA-PSK(AES), WPA2-PSK(TKIP), WPA2-
PSK(AES), WPA-PSK-MIXED. Please refer to "Wi-Fi Protected
Access (WPA)" on page 28 to learn more about these options.
Security Key:
Choose a password for your wireless security. Clients will need
this password in order to access your network wirelessly. If you
are currently connected to the router using Wi-Fi, you will need
to reconnect to the router using your new password once the
wizard has been completed.
D-Link DWR-932 User Manual

Wi-Fi Sharing

31