Lan Setup - D-Link DWR-932 User Manual

Section 3 - Configuration
The DWR-932 has a built-in DHCP server which can assign IP addresses to connected clients. This section allows you to configure the IP address
for the DWR-932 as well as configure its DHCP settings.
N S
etwork etuP
IP Address:
If you wish to change the router's IP address, enter the new
address here. If you change the IP address from the default,
you will need to enter the new address in your Internet
browser's address bar in order to access the web-based
configuration utility.
DHCP S
etuP
DHCP Server: Select either Enabled or Disabled for the DHCP server on your
DWR-932.
Start IP Address: Enter the starting IP addresses for the DHCP server's IP
assignment.
Number of Enter the number of IP addresses to be allocated by the DHCP
Addresses: server IP assignment.
DHCP Address Shows the starting and ending IP addresses for the DHCP
Range: server's IP assignment.
Click Apply to save the configuration.
D-Link DWR-932 User Manual

LAN Setup

20