Advertisement
Quick Links
Owner's Guide and Installation Manual
5HM52XXND Series Fan
UL Model No. : AC-552
Attach sales receipt to this card and retain as your proof of purchase
RETAILER NAME:
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
7.8 kgs
17.16 lbs
Total fan weight with light kit
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Monte Carlo Fan Company 5HM52 ND Series
Summary of Contents for Monte Carlo Fan Company 5HM52 ND Series
- Page 1 Owner’s Guide and Installation Manual 5HM52XXND Series Fan UL Model No. : AC-552 Attach sales receipt to this card and retain as your proof of purchase RETAILER NAME: DATE OF PURCHASE: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 7.8 kgs 17.16 lbs Total fan weight with light kit...
- Page 2 All set screws must be checked and tightened where necessary before installation. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers. Customer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2013 Monte Carlo Fan Company 11/15/2013...
- Page 3 Note:If Installing The Secondary Support Safety Ball. This must be done to prevent the fan body from the bracket. Cable in the U.S., Do Not Remove Knockouts In rotating when the blades are in motion. The Outlet Box. © 2013 Monte Carlo Fan Company 11/15/2013...
- Page 4 Remove side covers from canopy exposing Pass leadwires and safety cable through Remove the 3 yoke screws with the 4 holes. 2 closed holes and 2 open “L” the canopy. keyslot holes and save. shape holes. © 2013 Monte Carlo Fan Company 11/15/2013...
- Page 5 Install the 2 canopy mounting up position will result in upward air- screws securely. Repeat this process 4 more bracket screws from the hardware pack and flow. times until all blades are assembled. tighten securely. © 2013 Monte Carlo Fan Company 11/15/2013...
- Page 6 2 slot ear holes and 1 screw hole and Install the rubber washer first and save. twisting cap. Then tighten the 3 then the hex nut to the glass to se- screws. cure in place. © 2013 Monte Carlo Fan Company 11/15/2013...
- Page 7 Align hole in glass and hole in finial cap to allow the fan speed pull chain to pass through. Install finial nut and tighten. © 2013 Monte Carlo Fan Company 11/15/2013...
- Page 8 Reset the lights by turning off the wall switch, breaker, or by remote. Replace bulbs with the correct wattage bulbs, turn the power on. CAUTION: Make sure main power is turned off before entering switch housing. © 2013 Monte Carlo Fan Company 11/15/2013...
- Page 9 Jan.2012 new fornmat Jul.2013 Update for CUL regulation Nov.2013 5HM52XXND...
Need help?
Do you have a question about the 5HM52 ND Series and is the answer not in the manual?
Questions and answers