Download Print this page
Monte Carlo Fan Company 5HS42XX Series Owner's Manual
Monte Carlo Fan Company 5HS42XX Series Owner's Manual

Monte Carlo Fan Company 5HS42XX Series Owner's Manual

Monte carlo 5hs42xx series ceiling fan

Advertisement

Quick Links

Owner's Guide and Installation Manual
5HS42XX Series Fan
UL Model No. : 5HS42
Attach sales receipt to this card and retain as your proof of purchase
RETAILER NAME:
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
5.9 kgs
12.8 lbs
Total fan weight

Advertisement

loading
Need help?

Need help?

Do you have a question about the 5HS42XX Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Monte Carlo Fan Company 5HS42XX Series

  • Page 1 Owner’s Guide and Installation Manual 5HS42XX Series Fan UL Model No. : 5HS42 Attach sales receipt to this card and retain as your proof of purchase RETAILER NAME: DATE OF PURCHASE: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 5.9 kgs...
  • Page 2 All set screws must be checked and tightened where necessary before installation. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers. Customer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2013 Monte Carlo Fan Company 6/25/2013...
  • Page 3: Safety Cable Installation

    Note:If Installing The Secondary Support Safety Ball. This must be done to prevent the fan body from hardware pack. Cable in the U.S., Do Not Remove Knockouts In rotating when the blades are in motion. The Outlet Box. © 2013 Monte Carlo Fan Company 6/25/2013...
  • Page 4 3 screws already installed in on the edge of the Canopy. Note: For the fan. Install 3 flush mount screws provided into Canadian mounting refer to Step #8. smaller holes and tighten securely. © 2013 Monte Carlo Fan Company 6/25/2013...
  • Page 5 Repeat this process 4 more the previous step and tighten securely. bracket. times until all blades are assembled. Install blades to motor using the 10 motor screws provided. Tighten screws securely. © 2013 Monte Carlo Fan Company 6/25/2013...
  • Page 6 2.Check for loose or disconnected wires in fan switch housing. 3.Check for loose or disconnected wires in light kit. 4.Check for faulty light bulbs. CAUTION: Make sure main power is turned off before entering switch housing. © 2013 Monte Carlo Fan Company 6/25/2013...
  • Page 7 Feb.2012 New format Jun.2013 Update for CUL regulation...