Download Print this page
Monte Carlo Fan Company 5HV52XXXD Series Owner's Manual And Installation Manual

Monte Carlo Fan Company 5HV52XXXD Series Owner's Manual And Installation Manual

Advertisement

Quick Links

Owner's Guide and Installation Manual
Attach sales receipt to this card and retain as your proof of purchase
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
5HV52XXXD Series Fan
CUL Model NO. : 5HV52XXXD
RETAILER NAME:
RETAILER ADDRESS:
7.4 kgs
16.28 lbs
Total fan weight with light

Advertisement

loading
Need help?

Need help?

Do you have a question about the 5HV52XXXD Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Monte Carlo Fan Company 5HV52XXXD Series

  • Page 1 Owner’s Guide and Installation Manual 5HV52XXXD Series Fan CUL Model NO. : 5HV52XXXD Attach sales receipt to this card and retain as your proof of purchase DATE OF PURCHASE: RETAILER NAME: RETAILER ADDRESS: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 7.4 kgs...
  • Page 2: Cautions And Warnings

    All set screws must be checked and tightened where necessary before installation. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers Customer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2018 Monte Carlo Fan Company 9/2018...
  • Page 3 Warning: Cross pin and keeper pin must be installed securely, failure to install them will result in serious injury. © 2018 Monte Carlo Fan Company 9/2018...
  • Page 4 Outlet up into the outlet box. box. Make sure the studs protruding from the bottom of the Mounting bracket are installed with threads all the way through the bracket. © 2018 Monte Carlo Fan Company 9/2018...
  • Page 5 Safety Cable in the U.S., Do Not Remove the outlet box. The splices after being made Knockouts In The Outlet Box. should be turned upward and pushed carefully up into the outlet box. © 2018 Monte Carlo Fan Company 9/2018...
  • Page 6 (or black) to black (or blue). Make Place switch housing cap over light lead sure the quick connectors are clasped wires and Installation light fixture onto the firmly. switch housing cap with lock washer and hex nut provided. © 2018 Monte Carlo Fan Company 9/2018...
  • Page 7 finial. DO NOT OVER TIGHTEN completely down or completely up for fan the finial as glass may crack or break. to function. If the reverse switch is set in the middle position, fan will not operate. © 2018 Monte Carlo Fan Company 9/2018...
  • Page 8: Troubleshooting

    5.Remove light kit and check the plug connections if they are present. 6.If this fan uses remote controller, make sure dip switches are setting properly and make CAUTION: Make sure main power is turned off before entering switch housing and/or canopy. © 2018 Monte Carlo Fan Company 9/2018...
  • Page 9 Sep.2018 Mar.2019 9.3W...